Prepare the wall surface as you would for a ordinary Wallpaper. For best results, the wall should be free of any previous wall covering and reasonably clean

Sizing the wall first is advisable and removing baseboards (Skirting boards) will result in a neater finish.

Lay out the design as indicated in the instruction sheet. Prepare the Wallpaper paste and wait 10 – 20 minutes In the meantime, draw a horizontal line from floor to ceiling across the wall, this is your guide line which will ensure the design is centered on your wall.

Take Number 1, Apply Paste and begin in the bottom left corner.

Mount the piece carefully, putting it up to the line on the wall. Any small bubbles will disappear when the Photowall dries.

Continue applying pieces as indicated in the instructions. Overlap top and bottom sections by approximately 3mm. Finish off by trimming any excess and replace any baseboards (Skirting boards).